So once I'd got the boat running perfectly on the Impco 425, someone wanted to buy it...
So my "new" boat has an Ilmor 5.7v8 (MV8) with a Prins VSI-2 conversion done on it, it looks like Prins don't like anyone but their official installers poking around, but is there software available and interface cable to at least monitor whats going on rather than change anything.
I've a service light flashing so want to check it's just flashing for a reset rather than a sensor reading incorrectly.
Thanks
Prins VSI-2 cable/sw
Re: Prins VSI-2 cable/sw
Surely they can at least advise on service advice check and cancellation, looks like they have a good system.
Re: Prins VSI-2 cable/sw
I did a quick search and found many places the cable can be purchased although they may not be local to your area. The software is available online also, however use caution when downloading. Make sure the site is reputable.