prinz filter temp/pressure sender data wanted

Propane, Butane, LPG, GPL, C3H8, C4H10
Post Reply
bumpstart
Posts: 133
Joined: Wed Jan 20, 2010 9:09 pm

prinz filter temp/pressure sender data wanted

Post by bumpstart » Sun Dec 02, 2018 6:58 am

searching for some basic data about the resistance curves given by the bosch 0281002576 combination fuel temp/ pressure sender unit found on top of the Prinz filter unit
a fair bet to expect a delco curve for the temperature.. but is there any sure place to find out? also the inbuilt map sensor? 3 /4/5 bar?


changing out a profire ecu on a FC rx7 with 8 prinz injectors for an adaptronic m6000 / which has fuel density modelling in its Ve tune .. the profire has suffered repeated driver hardware failure and is limited driving the rx7 ignition

the rx7 is already LPG compliant with prinz vapour system

thanks in advance
when the going is hard, don't retard, remember your lubrication

storm
Posts: 637
Joined: Wed Jan 10, 2007 10:10 pm
Location: NSW, Australia

Re: prinz filter temp/pressure sender data wanted

Post by storm » Mon Dec 03, 2018 2:52 am

AMR manufacturing are doing parts of LPG vapour injection so maybe they would be able to help you out with some information. Please feel free to share if/when you get the data.
Every job is a self-portrait of the person who did it. Autograph your work with excellence.

Fuel flow requirements calculations viewtopic.php?f=5&t=1638

Post Reply