My Car

Let's hear all the gory details about your car and how it became alternative fuelled.
Post Reply
Caddy123
Posts: 30
Joined: Sat Dec 01, 2018 2:41 pm
Location: Netherlands

My Car

Post by Caddy123 »

I have a cadillac coupe deville 1979.
Have the car now for about 11 jr.
10 jr ago stripped the car new paint and new engine.
3 jr ago build a new engine bymyself 514 cui .
Engine build for propane why....its for me a chalenge and the gasoline prices are 1.60€ ltr overhere🤤

Engine specs :
10.1 cr
Forged rods
Forged pistons
Dual plane ported polished intake ( i know single plane better for propane!)
Ported polished heads.
Mild flat tapped comp cam.
High volume water and oil pump.
Arp head studs.

storm
Posts: 796
Joined: Wed Jan 10, 2007 10:10 pm
Location: NSW, Australia

Re: My Car

Post by storm »

Caddy123 wrote:
Sun Dec 02, 2018 10:23 am
.
Dual plane ported polished intake ( i know single plane better for propane!)
Ported polished heads.
Sounds like a nice car. Can I ask why you had the intake and heads polished?
Fuel flow requirements calculations
Engine air flow requirement calculation: CFM = Cubic Inches x RPM x Volumetric Efficiency (VE) ÷ 3456

Caddy123
Posts: 30
Joined: Sat Dec 01, 2018 2:41 pm
Location: Netherlands

Re: My Car

Post by Caddy123 »

Storm the heads have i ported polished myself.
And the intake dont say there name pm you.

Post Reply