WTB - Manifold ASME Tank w/Vapor Box

Post Reply
Jeff2014
Posts: 4
Joined: Thu Jan 23, 2014 4:02 pm

WTB - Manifold ASME Tank w/Vapor Box

Post by Jeff2014 » Wed Jan 29, 2014 6:21 pm

HI,

First time post on Frank's board. We've been communicating about propane motor fuel for a while, and I thought it might be a good time to check out his forum.

I am looking for another ASME manifold motor fuel tank with vapor box and all appropriate valving.

It needs to be at least 26 gallon water capacity and be no wider than 38". (In propane tank-speak, I think that's referred to as "long".) It will be mounted on the bed area of an Early Bronco, so it will need appropriate legs.

(I have spent a lot of time searching Craigslist and other forums and sales sites looking for tanks, so I know this is a bit of longshot.)

I am located in Indianapolis. I know that shipping used tanks is a "challenge", so it should be within driving distance of Indy.

Let me know if you have anything for sale, or have any questions.

(I have a source for a new tank; but, I thought I'd see if there is anything used available.)

Thanks

Jeff

Post Reply