Search found 18 matches

by altfueldakota
Wed May 20, 2015 11:48 am
Forum: Propane Forum
Topic: propane augmentation for gasoline
Replies: 2
Views: 763

Re: propane augmentation for gasoline

What I was thinking was maybe change the regulator or the vapor hose to a smaller one then have it switch on only when the cruise control is activated. I may just engineer something to fool the PCM manually and keep it working.
by altfueldakota
Tue May 19, 2015 7:08 pm
Forum: Propane Forum
Topic: propane augmentation for gasoline
Replies: 2
Views: 763

propane augmentation for gasoline

I have a 2001 dodge dakota 3.9 with dual curve system. Well the electronics are failing. The question is can I use part of the system to augment when running on gasoline?
by altfueldakota
Wed Apr 01, 2015 11:28 am
Forum: Propane Forum
Topic: fuel injector simulator question
Replies: 0
Views: 5881

fuel injector simulator question

fuel injector simulator is it possible when running on gasoline that it fails to connect a injector? I have a misfire code when burning gasoline. Replaced heads and lifters still get the code. 2001 dodge dakota 3.9 150k. Update; noid test light found the problem. Switched with spare wires and now wo...
by altfueldakota
Fri Sep 19, 2014 11:22 am
Forum: Propane Forum
Topic: fuel injection shut off
Replies: 4
Views: 975

Re: fuel injection shut off

I have 2001 dodge dakota 3.9 v6 the part# 4114 part of dual curve autotronic controls corp.
by altfueldakota
Wed Sep 17, 2014 8:07 am
Forum: Propane Forum
Topic: fuel injection shut off
Replies: 4
Views: 975

fuel injection shut off

I have fuel injector simulator on my dodge and it can't find another one that is good. I was thinking could l put a switch on the fuel injection relay? Will it trip a code?
by altfueldakota
Thu Oct 11, 2012 6:00 pm
Forum: Want to Sell Parts
Topic: 300 A, "L", tank and all
Replies: 1
Views: 2955

Re: 300 A, "L", tank and all

Still have the 300A mixer?
by altfueldakota
Thu Oct 11, 2012 5:52 pm
Forum: Want to Buy Parts
Topic: Impco AF9-2-30
Replies: 1
Views: 3263

Re: Impco AF9-2-30

I have an air shroud 300a. By now you have probably found one.
by altfueldakota
Thu Oct 11, 2012 2:11 pm
Forum: Propane Forum
Topic: missing parts CA300A-M-50
Replies: 1
Views: 558

missing parts CA300A-M-50

I bought a propane system off of craigslist. Tank,hoses,electronics,converter,snorkel and carb mixer. The mixer seems to be missing the piece that centers the diapham. I tried to put a picture can't upload. The system came off a 2001 dodge V8. I think the previous owner removed the piece for better ...
by altfueldakota
Tue Aug 07, 2012 2:06 pm
Forum: Propane Forum
Topic: bog /flat spot off idle
Replies: 11
Views: 1978

Re: bog /flat spot off idle

I seemed to solve the problem. The dualcurve box failed in controlling the fcv. I contacted carb&turbo in MN I purchased digital controller and tapped into the harness it does a great job. I have injector simulator seems to be failing one cylinder at a time. It has a total of ten leads I have a v6 I...
by altfueldakota
Thu Apr 19, 2012 8:46 pm
Forum: Propane Forum
Topic: Impco 225 Oops...
Replies: 3
Views: 969

Re: Impco 225 Oops...

I pulled the 1" Vapor hose to fix other problems and found heavy end build up about an inch from the reg that was closing the hose off to about 1/2" internally for about 3"... This is the last time I strip stuff from other trucks without checking them! :oops: I am having issues my system is going o...
by altfueldakota
Thu Sep 01, 2011 6:19 pm
Forum: Propane Forum
Topic: bog /flat spot off idle
Replies: 11
Views: 1978

Re: bog /flat spot off idle

Frank,
Thanks for the info and part number.
altfueldakota
by altfueldakota
Thu Sep 01, 2011 5:53 pm
Forum: Propane Forum
Topic: bog /flat spot off idle
Replies: 11
Views: 1978

Re: bog /flat spot off idle

Franz,
The big question where do I find one? Easy to replace two wires one screw. What can be used as a replacement? I think it works like IAC solenoid [Idle air control] does the same thing on a bigger scale.

altfueldakota
by altfueldakota
Thu Sep 01, 2011 1:04 pm
Forum: Propane Forum
Topic: bog /flat spot off idle
Replies: 11
Views: 1978

Re: bog /flat spot off idle

Franz, I did pull off the hose slowly and it did what you wrote stumble/smooth. With the voltmeter on the fuel control valve I would adjust and watch the meter I had it leaned out to the point of killed the engine and the other way rich to the point I could smell it. I found I think a happy medium d...
by altfueldakota
Wed Aug 31, 2011 1:13 pm
Forum: Propane Forum
Topic: bog /flat spot off idle
Replies: 11
Views: 1978

Re: bog /flat spot off idle

Franz,
I pulled the vacuum hose off it almost died then put it back on.
by altfueldakota
Wed Aug 31, 2011 1:10 pm
Forum: Propane Forum
Topic: dual curve question
Replies: 4
Views: 1127

Re: dual curve question

Franz, I did the volt meter pos. orange,neg LT blue 0.0 volts. I did put the pos. on the lite blue wire and other lead to the neg. bat. reading from 8.5 to 13.5 rich according to the installation backed out the idle mixture screw to lean it out no change. I screw it in to change? I noticed the when ...