Impco J - no secondary test port :(

Propane, Butane, LPG, GPL, C3H8, C4H10
Post Reply
jono
Posts: 338
Joined: Wed May 16, 2007 11:46 pm
Location: New South Wales, Oz

Impco J - no secondary test port :(

Post by jono » Sun Dec 10, 2017 11:23 pm

Anyone notice the J and its clones do not have a test port for the secondary chamber?

With such thin walls there really is no meat to add a 27 tip 1/8" taper hole and tap either

Maybe a larger rivnut/ nutsert inside out might do the trick?

If not possible it rules out using the J with Peel Instruments lean bias logic processor.

And you know, after kitting a J I think I prefer the L anyway

Like this forum and want to help support it for free?
Please support this forum by giving us a commission on your next Amazon purchase.  It's easy and doesn't cost you a cent.  Just paste the following tag to the end of any Amazon link before you buy:
&tag=rasofuelsforum-20

For example, this link:
https://www.amazon.ca/Chevron-Delo-400-SDE-15W-40/dp/B078H595BN/ref=sr_1_9?s=automotive&ie=UTF8&qid=1520262720&sr=1-9&keywords=15W-40

Becomes this link:
https://www.amazon.ca/Chevron-Delo-400-SDE-15W-40/dp/B078H595BN/ref=sr_1_9?s=automotive&ie=UTF8&qid=1520262720&sr=1-9&keywords=15W-40&tag=rasofuelsforum-20

Post Reply