292 chevy blow-thru build pics

[Uglydog56]

I have some pics of my 292 build so far if anyone wants to look. I haven't really done a lot of the propane fab yet, but that is coming soon. Here is a link to the photobucket. The descriptions on the pics tell most of the details.

http://s743.photobucket.com/albums/xx74 ... 2%20build/

Quick overview: 292 GMC L6 .030 over. Stock crank, ATI balancer, crower 4340 h-beam rods, venolia 2618 turbo pistons 9.9:1 compression, total seal rings. Comp hydraulic cam - 230/230 @ .050, .606 lift, 112 LSA. Rhoads V-max lifters, Smith Brothers pushrods, 1.8 Harland Sharp rockers for big block chevy (massaged), Ravenswood stud girdle. Ravenswood auto lump-ported cylinder head - flows about 240 @ .600. Clifford intake manifold and headers. 2 1/4" headpipes y to 2.5" mandrel exhaust. Rear mount 62-1 turbo, .68 turbine A/R. Impco 425 in blow-through with Model E and electric lockoff. NOS super power shot - starting at 100 shot and going up from there as necessary. McLeod adjustable single disc clutch, richmond 6 speed trans, Ford 8.8" rear w/ 3.73 gears, cal-tracs, 26x9 slicks. 56 Chevy 4 door, shooting for 3600lbs with driver and high 11's.

[franz]

Like a friend of mine says, "Nice Enough"!

I built a 1963 Chevy Nova 230 cid back in 1970 using all home made parts, mostly intake and exhaust. That darn thing ran pretty well. I wish I had the resources to have gone through it like you did yours, that assembly of parts looks first rate!

keep us informed as to your progress.

Franz

[storm]

Nice work, Just thinking of where you are from cause from the 3rd picture you can't be in Australia. Not enough clearance for our regulations.