MM X450 mixers available!!!!!!

Propane, Butane, LPG, GPL, C3H8, C4H10
Post Reply
storm
Posts: 741
Joined: Wed Jan 10, 2007 10:10 pm
Location: NSW, Australia

MM X450 mixers available!!!!!!

Post by storm »

I've just been surfing Ebay Australia and come across this https://www.ebay.com.au/itm/MM-X450-Lpg ... ctupt=true
Going to try and get some for myself.
Last edited by storm on Fri Apr 16, 2021 12:20 am, edited 1 time in total.
Fuel flow requirements calculations
Engine air flow requirement calculation: CFM = Cubic Inches x RPM x Volumetric Efficiency (VE) ÷ 3456

storm
Posts: 741
Joined: Wed Jan 10, 2007 10:10 pm
Location: NSW, Australia

Re: MM X450 mixers available!!!!!!

Post by storm »

I purchased 1 of these yesterday and it has been sent already. I've been onto Proquip in Canada and they are helping me get baseplate adaptors so I can run it.
Fuel flow requirements calculations
Engine air flow requirement calculation: CFM = Cubic Inches x RPM x Volumetric Efficiency (VE) ÷ 3456

storm
Posts: 741
Joined: Wed Jan 10, 2007 10:10 pm
Location: NSW, Australia

Re: MM X450 mixers available!!!!!!

Post by storm »

Proquip are able to get me a Gann A9-1 which adapts the X450 to a Holley 4 barrel baseplate, but they are unable to find a Gann A9-7 which adapts the X450 to a Quadrajet baseplate. Does anyone know of an A9-7 that is available that I can get?
Fuel flow requirements calculations
Engine air flow requirement calculation: CFM = Cubic Inches x RPM x Volumetric Efficiency (VE) ÷ 3456

Post Reply