Hi guys,Im new to this forum but have long been a fan of propane (lpg as we call it down here ) and have a Mopar daily driver set up with a 318 stroker,A518 o/drive trans that uses a gasresearch lpg system.It runs fine but I would really love to hear ideas/suggestions for my falcon.I have been slowly collecting the parts for my latest engine, it is a roller cam block with a crower cam (healthy but very streetable 228@.050" and .520 or so lift) ported edelbrock heads,JE 10.5/1forged pistons,crower 5.4" rods (rod ratio of 1.8/1).It will be backed by a tremec TKO500 5 speed and 3.5 rear gears.We were looking at probably close to 400 N/A on premium fuel at a guess .
My big question is inducion,I want power of course,but it will be street driven most of the time and efficiency/economy/driveability is also very important,as is something that looks great.I have plenty of ideas ,dual impco 425 on an edelbrock dual 4 bbl intake,technocarb on a single 4bbl intake,centrifugal blower and blow through carb (my favourite),turbo,efi vapour with a GT40 intake??
Basically,its a clean slate,I only have lpg experience with my mopar with a gasresearch system and would love to hear ideas and suggestions from others who have been there and know the alternatives.Thanks guys looking forward to your ideas,Steve
Tell us what you have on the go!
1 post • Page 1 of 1