Alternative Fuels

Thanks Storm for this information. I want to be shure to make the right connections before starting . I will try to get info from AEB.

And I understand that one wire has to go to the gas/propane selector. It will be 12v+ in my case.

I found this link. https://manualzz.com/doc/7542083/technical-manual-for-electronic-spark-advance Page 15 is interesting but I don"t understand. As I said I know where to find the + and tach connector on the HEI. There are 3 other wires on the HEI that go from the housing (module) to the distributor...

Thanks. I know where the + and tach are located on the HEI, but the other 3 wires?

Hello guys
Finally got myself an AEB Wolf-n processor. Does anyone know how to connect it to a Chevy HEI ignition?
Thanks in advance

Maybe it's time for a new forum , running on water .
http://cgi.ebay.com/ebaymotors/HOW-TO-R ... dZViewItem

I have an additional question on this subject . I mounted the regulator directly to the 425 with a threaded pipe nipple . The high pressure 12V shutoff valve is mounted on the fender , connected with a high-pressure flex hose to the regulator . After driving , this hose and the mixer are filled with...

Thanks guys . I found a vortec truck filterbox at the junkyard and bought a K&N filter that's also used for 454's . I have an Impco AA2-15 bonnet and have ordered 2 rubber hump tube couplers . I will modify the inlet opening of the airbox ( enlarge it ) , it looks a bit small to me . I think it will...

Thanks . So I guess it doesn't make any difference , pcv speaking , running on gas or propane . I can close that book .

I mean the pcv , the valve is lokated at one valve cover and is connected to vacuum from carb or manifold , on the other valve cover is a breather or a hose into the aircleaner housing , so it's pulling fresh air through the engine , the valve opens at part throttle .

I read that the pcv system acts like a "regulated" vacuum leak on a gasoline engine . Does it hurt the functioning of a propane mixer like a 425 ? Everyone says to avoid vacuum leaks for proper working of the mixer , but when the pcv-valve opens at part throttle it feels to me it creates a connectio...

I want to mount a cold air intake to my 425 with air coming from the front , thru a hole between radiator an headlights . I will connect the balance ports between 425 and EB converter . Can I do that just like that ? I don't have a filterbox yet , so I want to ask if someone knows what I should look...

AA1-57's , A1-63's , AA1-60's , AA1-59's , A1-16-2's . Can buy them new here , but maybe it's cheaper for me to buy them used overseas and pay some shipping . th.i.a.

I will sell it when I finished the conversion . Did you check my location ? In Canada for example they are much less expensive then over here . It will be easy to sell it here for a good price .

I've deceided to replace my 300A by a 425 and to go for mono-fuel . I bought a used 425 but there is a oval-like plate or shim with a hole in it in the inletport . Does anyone know the function of it ?