Search found 23 matches
- Fri Dec 07, 2018 4:08 pm
- Forum: Propane Forum
- Topic: AEB wolf-n HEI wiring
- Replies: 9
- Views: 7112
Re: AEB wolf-n HEI wiring
Thanks Storm for this information. I want to be shure to make the right connections before starting . I will try to get info from AEB.
- Fri Dec 07, 2018 12:29 pm
- Forum: Propane Forum
- Topic: AEB wolf-n HEI wiring
- Replies: 9
- Views: 7112
Re: AEB wolf-n HEI wiring
And I understand that one wire has to go to the gas/propane selector. It will be 12v+ in my case.
- Fri Dec 07, 2018 12:27 pm
- Forum: Propane Forum
- Topic: AEB wolf-n HEI wiring
- Replies: 9
- Views: 7112
Re: AEB wolf-n HEI wiring
I found this link. https://manualzz.com/doc/7542083/technical-manual-for-electronic-spark-advance Page 15 is interesting but I don"t understand. As I said I know where to find the + and tach connector on the HEI. There are 3 other wires on the HEI that go from the housing (module) to the distributor...
- Thu Dec 06, 2018 1:39 pm
- Forum: Propane Forum
- Topic: AEB wolf-n HEI wiring
- Replies: 9
- Views: 7112
Re: AEB wolf-n HEI wiring
Thanks. I know where the + and tach are located on the HEI, but the other 3 wires?
- Thu Dec 06, 2018 12:34 pm
- Forum: Propane Forum
- Topic: AEB wolf-n HEI wiring
- Replies: 9
- Views: 7112
AEB wolf-n HEI wiring
Hello guys
Finally got myself an AEB Wolf-n processor. Does anyone know how to connect it to a Chevy HEI ignition?
Thanks in advance
Finally got myself an AEB Wolf-n processor. Does anyone know how to connect it to a Chevy HEI ignition?
Thanks in advance
- Fri Jun 09, 2006 5:27 pm
- Forum: Hydrogen Forum
- Topic: H2O ?
- Replies: 4
- Views: 14452
H2O ?
Maybe it's time for a new forum , running on water .
http://cgi.ebay.com/ebaymotors/HOW-TO-R ... dZViewItem
http://cgi.ebay.com/ebaymotors/HOW-TO-R ... dZViewItem
- Thu Mar 30, 2006 3:25 am
- Forum: Propane Forum
- Topic: Mounting Locations
- Replies: 17
- Views: 13640
I have an additional question on this subject . I mounted the regulator directly to the 425 with a threaded pipe nipple . The high pressure 12V shutoff valve is mounted on the fender , connected with a high-pressure flex hose to the regulator . After driving , this hose and the mixer are filled with...
- Thu Mar 30, 2006 2:58 am
- Forum: Propane Forum
- Topic: Ram air on a 425 mixer ?
- Replies: 5
- Views: 5402
Thanks guys . I found a vortec truck filterbox at the junkyard and bought a K&N filter that's also used for 454's . I have an Impco AA2-15 bonnet and have ordered 2 rubber hump tube couplers . I will modify the inlet opening of the airbox ( enlarge it ) , it looks a bit small to me . I think it will...
- Thu Feb 09, 2006 3:43 pm
- Forum: Propane Forum
- Topic: PCV question
- Replies: 5
- Views: 5134
- Wed Feb 08, 2006 11:40 am
- Forum: Propane Forum
- Topic: PCV question
- Replies: 5
- Views: 5134
- Wed Feb 08, 2006 6:29 am
- Forum: Propane Forum
- Topic: PCV question
- Replies: 5
- Views: 5134
PCV question
I read that the pcv system acts like a "regulated" vacuum leak on a gasoline engine . Does it hurt the functioning of a propane mixer like a 425 ? Everyone says to avoid vacuum leaks for proper working of the mixer , but when the pcv-valve opens at part throttle it feels to me it creates a connectio...
- Sat Jan 28, 2006 5:14 pm
- Forum: Propane Forum
- Topic: Ram air on a 425 mixer ?
- Replies: 5
- Views: 5402
Ram air on a 425 mixer ?
I want to mount a cold air intake to my 425 with air coming from the front , thru a hole between radiator an headlights . I will connect the balance ports between 425 and EB converter . Can I do that just like that ? I don't have a filterbox yet , so I want to ask if someone knows what I should look...
- Tue Jan 17, 2006 9:03 am
- Forum: Want to Buy Parts
- Topic: Looking for used Impco AA1-57 parts for 300A mixer
- Replies: 0
- Views: 7142
Looking for used Impco AA1-57 parts for 300A mixer
AA1-57's , A1-63's , AA1-60's , AA1-59's , A1-16-2's . Can buy them new here , but maybe it's cheaper for me to buy them used overseas and pay some shipping . th.i.a.
- Sun Dec 04, 2005 4:47 pm
- Forum: Propane Forum
- Topic: Plate in propane-inlet 425 ?
- Replies: 5
- Views: 5181
- Tue Nov 29, 2005 1:14 pm
- Forum: Propane Forum
- Topic: Plate in propane-inlet 425 ?
- Replies: 5
- Views: 5181
Plate in propane-inlet 425 ?
I've deceided to replace my 300A by a 425 and to go for mono-fuel . I bought a used 425 but there is a oval-like plate or shim with a hole in it in the inletport . Does anyone know the function of it ?