Search found 5 matches

by robin_chevelle
Mon Oct 25, 2021 9:22 am
Forum: Propane Forum
Topic: AFR rich when letting go of throttle
Replies: 0
Views: 3576

AFR rich when letting go of throttle

Need some help and advice. My chevy Van with a 383 small block stroker Impco 425 mixer single fuel model e vaporizer does run very good. 0 to 60mph goes in 6.5 seconds, car is 2200kilo (th350 transmission and 3.08 rear end gearing). Just did a very long drive of 2172 kilometer and used only 418 lite...
by robin_chevelle
Sun Nov 20, 2016 6:17 am
Forum: Propane Forum
Topic: Camshaft for sbc on propane
Replies: 12
Views: 10144

Re: Camshaft for sbc on propane

Thank you for the response. Really not trying to push this dilemma one way or the other and I certainly dit not already have made up my mind. :wink: I don't see this as a dilemma, I see this as someone who asked for advice and has been given it only to come back with wrong information and use it fo...
by robin_chevelle
Sat Nov 19, 2016 3:37 am
Forum: Propane Forum
Topic: Camshaft for sbc on propane
Replies: 12
Views: 10144

Re: Camshaft for sbc on propane

Thank you for the response. Really not trying to push this dilemma one way or the other and I certainly dit not already have made up my mind. :wink: Like Franz said: "Lets assume for a second that your current camshaft may indeed be worn out" Just for the discussion about a propane camshaft, for a 4...
by robin_chevelle
Thu Nov 17, 2016 3:23 pm
Forum: Propane Forum
Topic: Camshaft for sbc on propane
Replies: 12
Views: 10144

Re: Camshaft for sbc on propane

thanks for you reply. volumetric efficiency: 400ci, 75%, 4750rpm = 412 to 536 cfm. somewhere between 4500 and 4750 will be max. rpm. I need to change the camshaft in the engine, don't know what's in it now. And because I need to buy one, I want to use this opportunity to buy the best cam for the app...
by robin_chevelle
Wed Nov 16, 2016 12:54 pm
Forum: Propane Forum
Topic: Camshaft for sbc on propane
Replies: 12
Views: 10144

Camshaft for sbc on propane

Can someone give me a good direction, advice or just join the discussion about a camshaft for a sbc on Propane? What does propane like?? The details: 400sbc stock crank, rods and pistons. aluminum cylinder heads 65cc chambers (2.020 in. Intake valve and 1.600 in. Exhaust valve.) angle plug heads wit...