Search found 37 matches
- Wed Feb 03, 2016 6:10 am
- Forum: Propane Forum
- Topic: Radiator Suggestions for European Ford PINTO 2.000 cc
- Replies: 0
- Views: 9499
Radiator Suggestions for European Ford PINTO 2.000 cc
Due to cooling issues my 2.8 v6 was has serious gasket and head issues. This engine has siamesed exhaust ports, already has head issues with gasoline usage and using with lpg make disaster. (2 sets of head crack, more than 10 gasket change in last 15k km) And I'm going to change my engine to 2.0 I4 ...
- Thu Feb 13, 2014 12:40 am
- Forum: Propane Forum
- Topic: Constant lean usage and after effects
- Replies: 4
- Views: 3981
Constant lean usage and after effects
Hello, Due to outstanding high LPG prices, drivers and LPG tuners searches new approachs. Lately we seen cars tuned to 18.0 afr at 3000 rpm and also they had smaller mixer intake holes. Drivers claims very good millage and good enough driveability. Is there any bad consequences using cars at 18.0 af...
- Thu Feb 13, 2014 12:31 am
- Forum: Propane Forum
- Topic: Price of propane
- Replies: 10
- Views: 7023
Re: Price of propane
Same in Turkey.
In current market, we pay about 1.3 USD per Litre...
I believe it was most expensive in the world.
In current market, we pay about 1.3 USD per Litre...
I believe it was most expensive in the world.
- Thu Feb 13, 2014 12:27 am
- Forum: Propane Forum
- Topic: Idle RPM difference between to different brand LPG
- Replies: 2
- Views: 2940
Re: Idle RPM difference between to different brand LPG
Thanks,
Their price differecence not that much (maybe 5 US Cents per litre).
Anyway thanks
Their price differecence not that much (maybe 5 US Cents per litre).
Anyway thanks
- Sun Feb 09, 2014 10:01 am
- Forum: Propane Forum
- Topic: Idle RPM difference between to different brand LPG
- Replies: 2
- Views: 2940
Idle RPM difference between to different brand LPG
Hello, Mostly I use most cheapest local brand in my car. However last month I use BP lpg and I notice idle was higher than usual. Also I look like does more mpg however I'm not really sure (due to BP to highway and local brant to very short city driving) Anyway. I'm just curious about RPM change. Do...
- Tue Jul 23, 2013 4:39 pm
- Forum: Propane Forum
- Topic: Impco system propane carb setup questions
- Replies: 11
- Views: 8034
Re: Impco system propane carb setup questions
No instructions, manufacturer says it will support max 160 kw. You need custom carburettor hat, it does not come with throttle valve, so you have to fit by yourself. we weld some kind of carburettor hat. Performance I had clutch problems so my takeoff from first gear was sluggish, after 1300 rpm it ...
- Tue Jul 23, 2013 2:34 pm
- Forum: General Tech
- Topic: Calculatin theorical fuel consumption
- Replies: 0
- Views: 14443
Calculatin theorical fuel consumption
Hello, Recently I was constant arguments against HHO scammer's in our local forum. However telling termodynamic effiency does not sense for most people. So I just put up how much air and fuel needs for a 1.600 cc engine at 3000 rpm. After some googling I found air consumption of the engine was Displ...
- Tue Jul 23, 2013 2:23 pm
- Forum: Propane Forum
- Topic: Impco system propane carb setup questions
- Replies: 11
- Views: 8034
Re: Impco system propane carb setup questions
Hi there, I had one question about tuning. When I direct connec from vaporizer to carb it was running about 14.2 afr. And I want to run lener (let say around 16.0). I presume, fitting harder sping to main membrane will solve the problem. Did I miss something ? Also I still not have any installation ...
- Sat Jul 13, 2013 5:51 pm
- Forum: Propane Forum
- Topic: Impco system propane carb setup questions
- Replies: 11
- Views: 8034
Re: Impco system propane carb setup questions
I should have to take photos... No, Vaporizer to LPG carb pipe was very short. Even shorter than last static mixerr setup. I mean my new LPG carb was bit away from gas carb. It was too tal and I cannot fit over the of of my gas carb. So I build a carburetttor cap / hat http://recarb.com.au/images/Ha...
- Wed Jul 10, 2013 5:40 pm
- Forum: Propane Forum
- Topic: Impco system propane carb setup questions
- Replies: 11
- Views: 8034
Re: Impco system propane carb setup questions
I found the error. In my setup, I had propane carb => 20cm intake pipe => custom carburettor hat => then carburettor => riser => intake => engine. So ? its a long way form vaporizer to engine. On first start it takes time to reach lpg to engine. Also I'm shutting down engine via LPG on off switch. S...
- Sun Jul 07, 2013 5:11 pm
- Forum: Propane Forum
- Topic: Impco system propane carb setup questions
- Replies: 11
- Views: 8034
Re: Impco system propane carb setup questions
Thanks for answer.
I'll try with choked carb. Before the propane carb I do not have any long startup problems. Today 35 celcius and it has same 5 second crank time. Most of my setups has instant cranking...
Well, so where is my dual 38 .....
I'll try with choked carb. Before the propane carb I do not have any long startup problems. Today 35 celcius and it has same 5 second crank time. Most of my setups has instant cranking...
Well, so where is my dual 38 .....
- Sun Jul 07, 2013 2:49 pm
- Forum: Propane Forum
- Topic: Impco system propane carb setup questions
- Replies: 11
- Views: 8034
Impco system propane carb setup questions
Hello, Finally I import some chinese made impco knock off propane carbs. (25 USD each). I setup easly And I have some questions about... I had 2.800 cc (170 cid) v6 ford cologne engine which had 34/34 weber carb, plus had a Mercedes Benz coil for better spark power. I had 15.5 afr on ide and 4500 rp...
- Sun Apr 07, 2013 3:44 pm
- Forum: General Tech
- Topic: Using propane coooling effect as air conditioner
- Replies: 1
- Views: 11425
Using propane coooling effect as air conditioner
Hello, Summer is coming and my car does not have an A/C. And I just wonder. When there where a problem with LPG reducer water pipes it was frozen. Is there any possibility to generate some device that use this frooze effect. (I hope my english enough to explain this) What if I build some special tan...
- Thu Mar 14, 2013 6:43 am
- Forum: General Tech
- Topic: Some engineering help Please
- Replies: 1
- Views: 6352
Some engineering help Please
Dear firends. I'm tyring to improve our stationary wideband analyzer. Current usage needs to put o2 probe into exhaust. And this usage lead probe damage and some type of the exhaust does not accept probe (vw buggy and almost all scooters). So we plan to improve device put probe in stationary positio...
- Tue Feb 26, 2013 2:19 pm
- Forum: Propane Forum
- Topic: classic sequental setup on echoboost engines
- Replies: 5
- Views: 4700
Re: classic sequental setup on echoboost engines
My main concern was will intake injection cause any backfire on turbo engine...